Datamax M-Class Mark II M-4206 User Manual

M-4206 37
5.0 Introduction
This chapter details the cleaning, adjusting, and troubleshooting tips for the printer. The following table outlines the
recommended maintenance schedule for the various printer parts.
Area Method Interval
Printhead Turn off the printer before cleaning
the printhead. Use solvent* on a
cotton swab to clean the printhead
from end to end.
After every roll
of media.
Platen Roller Turn the power off. Rotate the
platen roller and clean it thoroughly
with solvent* and a cotton swab.
After every roll
of media.
Peel-Off
Roller
Rotate the peel-off roller and clean
it thoroughly with solvent* and a
cotton swab.
After every roll
of media.
Media Path Solvent* After every roll
of media.
Peel/Tear Bar Solvent* As needed
Media Sensor Air blow Monthly
Exterior Mild detergent or desktop cleaner. As needed
Interior Brush or vacuum cleaner As needed.
* It is recommended that a solvent containing isopropyl alcohol be used.
Warning
Isopropyl alcohol is a flammable solvent, always take the proper
precautions when using this substance.

Datamax M-Class Mark II M-4206 Specifications

General

Print Resolution	203 dpi
Print Method	Thermal Transfer and Direct Thermal
Max Print Width	4.25 inches
Max Print Speed	6 ips
Memory	8 MB Flash
Interfaces	Serial, Parallel, USB
Media Sensor	Reflective and Transmissive
Media Types	Labels, Tags
Label Roll Diameter	8 inches
Label Thickness	0.0025 to 0.01 inches
Maximum Print Length	99 inches