Datamax M-Class Mark II M-4206 User Manual

M-4206 55
Embedded Fonts and Barcodes
All character fonts and barcodes available with the printer are described in this section. Each font and barcode has a name
associated with it for use in programming. Human-readable fonts have numeric names while barcode fonts have alpha
names.
Fonts
Fonts 0 through 8 use the slash zero (Ø) conventions for distinguishing between the zero and the alphabetic O. The slash
can be removed with the label formatting command Z. These fonts are non-proportional (monospaced): all of the
characters take up the same amount of space when printed.
The Triumvirate font number 9 is a proportional font; each character will take up a different amount of space when printed.
Font Valid ASCII Characters (decimal) Use with Record
Structure Type
0 32-127,255
1 32-168, 171, 172, 225,255
2 32-168, 171, 172, 225,255
3 32, 35-38, 40-58, 65-90, 128, 142-144, 146, 153,
154, 156, 157, 165, 168, 225,255
4 32, 35-38, 40-58, 65-90, 128, 142-144, 146, 153,
154, 156, 157, 165, 168, 225,255
5 32, 35-38, 40-58, 65-90, 128, 142-144, 146, 153,
154, 156, 157, 165, 168, 225,255
6 32, 35-38, 40-58, 65-90, 128, 142-144, 146, 153,
154, 156, 157, 165, 168, 225,255
7 32-126
8 32, 48-57, 60, 62, 67, 69, 78, 83, 84, 88, 90
Internal
Bit-Mapped
Fonts
9 32-126, 128-169, 171-173, 181-184, 189, 190, 198,
199, 208-216, 222, 224-237, 241, 243, 246-250,255 Smooth Font
9
Dependent upon selected symbol set; see the
Programmers Manual.
Downloadable
Scalable Font

Datamax M-Class Mark II M-4206 Specifications

General

Print Resolution	203 dpi
Print Method	Thermal Transfer and Direct Thermal
Max Print Width	4.25 inches
Max Print Speed	6 ips
Memory	8 MB Flash
Interfaces	Serial, Parallel, USB
Media Sensor	Reflective and Transmissive
Media Types	Labels, Tags
Label Roll Diameter	8 inches
Label Thickness	0.0025 to 0.01 inches
Maximum Print Length	99 inches