Datamax M-Class Mark II User Manual

ii
5 Maintenance and Adjustments
5.1
Cleaning Intervals ...........................................................47
5.2 Cleaning the Printhead.....................................................48
5.3 Media Width Adjustment ..................................................49
5.4 Printhead Burn Line Adjustment ........................................50
5.5 Printhead Pressure Adjustment .........................................51
5.6 Printhead Replacement ....................................................52
5.7 Darkness Adjustment.......................................................53
5.8 Resetting the Printer........................................................54
5.9 Downloading Firmware and Fonts ......................................55
5.10
File Handling Messages (Display-Equipped Models) ..............56
6 Troubleshooting
6.1
Problem Resolution..........................................................59
6.2 Fault and Warning Messages (Display-Equipped Models).......63
6.3 Hex Dump Mode .............................................................68
Appendix A - Specifications
Appendix B - GPIO Port
Appendix C - Paper Menu Setup
(Non-Display Models)
Appendix D - Changing the Language

Datamax M-Class Mark II Specifications

General

Media Sensor	Adjustable reflective and transmissive sensors
Print Method	Thermal Transfer
Print Resolution	203 dpi
Memory	8 MB Flash, 16 MB SDRAM
Interface Options	USB, Serial, Ethernet, Parallel
Media Type	Roll-fed, die-cut, continuous, fan-fold, tags, ticket stock
Media Width	1.0 in (25.4 mm) to 4.65 in (118 mm)
Media Thickness	0.0025 in (0.0635 mm) to 0.010 in (0.254 mm)
Media Roll Diameter	8 inches (203 mm) max
Ribbon Width	1 to 4.33 inches (25.4 to 110 mm)
Ribbon Length	1968 ft (600 m)
Ribbon Core	1 inch (25.4 mm)
Label Width Range	1.0 in (25.4 mm) to 4.65 in (118 mm)
Label Length Range	0.25 to 39 inches (6.35 to 991 mm)