MICROFLASH 4TE PRINTER USER'S GUIDE
9
Using 802.11b/Bluetooth
Radio printers are configured with default factory
settings. To determine your printer's radio
configuration, print a self-test. (For more information,
see
Printing a Self-Test on page 8
.) If you have multiple
printers, configure them specifically for use in your
environment.
For proper system operation, set the following
parameters on your printer and host computer:
802.11b Parameters
ESS ID
IP Address (if not DHCP)
DHCP
Sub Net Mask
WEP Encryption
Port
Network Type
Bluetooth Parameters
Device Name
Authentication
Bondable
Discoverable
Connectable
Encryption
For information on setting parameters, see
Configuring
the Printer on page 8
. Contact your network
administrator to verify the proper radio settings for your
environment.
Note: The following information applies to printers
with 802.11b/Bluetooth capabilities.
To Next Page
Loading...
Need help?
General