MICROFLASH 4TE PRINTER USER'S GUIDE
11
Radio LED
* If the signal quality option is on (default is off) and
the printer is awake, the amount of time the blue radio
LED is on indicates the signal strength. For example, if
the blue LED is on 90% of the time, the printer has a
very strong signal; however, if the blue LED is on only
10% of the time, the printer has a very weak signal.
When the signal quality option is turned on, the blue
radio LED indicates signal strength only. When the
printer is asleep, the radio strength is not indicated.
Radio LED*
Blue flash - slow* RF power is on and printer is asleep.
Blue flash - fast* RF power is on and printer is awake.
Blue flash to solid
red
The printer is out of range of the access
point and/or infrastructure and it is not
correctly configured for the radio it
recognizes.
Off RF power is off.
To Next Page
Loading...
Need help?
General