MICROFLASH 4TE PRINTER USER'S GUIDE
16
Overview
External charge-capable printers have two charging
contact points located on the back of the printer's case
(Figure 16). External charge-capable printers can be
used with various Datamax-O’Neil accessories such as
the swivel lock bracket and the external swivel lock
depot charger. When an external charge-capable
printer is mounted to one of these accessories, the
printer's batteries are automatically charged. For more
information, see the instruction sheet(s) included with
the accessories.
Warning: Use of any product not approved by
Datamax-O’Neil for use with their printers could cause
damage to the batteries and/or printer and will void
the warranty.
Failure to observe the instructions and/or warnings
specified in the documentation may result in damage
to your printer. Datamax-O’Neil does not accept liability
for resulting damages or injuries.
To Next Page
Loading...
Need help?
General