MICROFLASH 4TE PRINTER USER'S GUIDE
14
Using a CardReader
General Guidelines
To wake up the CardReader, insert a card into the
CardReader slot. One short beep indicates the
CardReader/printer is awake.
If you are using a Smart CardReader, insert a card
with the gold contacts facing away from the printer
and leave the card in CardReader slot.
If you are using a Magnetic CardReader, insert a
card with the stripe facing toward the printer, then
slowly remove the card from the CardReader slot.
For information on CardReader LED indicators and
audio indicators, see
Audio Indicators and LEDs on
page 10
.
Note:
T
he following information applies to printers
installed with the CardReader option.
To Next Page
Loading...
