Need help?Do you have a question about the Dateq BCS70 and is the answer not in the manual?
Configuration of DIP switches for BCS71 and BCS72 modules.
Table of available patterns for controlling connected equipment.
Specific DIP switch positions for various equipment types.
DIP switch settings for the BCS73 module, especially for Telos ONE.
Details on controls like Mic/Line, Gain, Tone, PAN, CUE, Fader, and ON/OFF.
Details controls like Line 1/2, Gain, Mono, Tone, BAL, CUE, Fader, and ON/OFF.
Pinout details for the 25-pin Sub-D connectors.
Details controls like Com, Tel ON/OFF, Tone, PAN, CUE, Fader, and ON/OFF.
Pinout for 9-pin female audio and 9-pin male remote connectors.
Details on SETUP, STUDIO, METER, AUX, AUD, AIR.CUE, Mute, C.R., Mono, PGM/AIR, MIX, PHONES.
Controls for Guest 1/2 and Announcer headphone outputs and COM bus.
Detailed explanation of various talkback buttons (TALK ALL, GST, ANN, COM, CUE).
Explains connectors like AIR/SPARES, ANN/GST, INSERTS, CR-L/CR-R, DIRECTOR, ON-AIR.
Pinout for the 9-pin female Sub-D Director connector.
Pinout for the 15-pin female Sub-D Ann/Guest/Studio connector.
Description of PGM, AUD, and AUX balanced audio outputs.
Procedure to activate and use the Setup mode.
List of settings adjustable via Setup mode for various functions.
Description of the Quadruple Dynamic Mix-Minus system for hybrid returns.
Description of UP, DOWN, and UP/DOWN timer modes.
Configuration via jumpers J1, J2, and J3 for master/slave and time format.
General| Microphone Inputs | 2 |
|---|---|
| Phono Inputs | 2 |
| Line Inputs | 6 |
| EQ per Channel | 3-band |
| Kill Switches | Yes |
| Talkover | Yes |
To Next Page
