DAYTEK PLASMA DISPLAY - Technical Specifications

4 4
Maintenance and Service
Supported Display Modes
 If any signal of unsupported resolution is input, the "Out of Range" message appears.
The outside design and specification can be modified without any previous notice for
improving the performance.
● Specifications
● Component Mode [
Y , C B ( P B), CR ( PR)
]
Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz)
7 2 0×4 8 0 15.73 6 0 . 0 0 SDTV, DVD 480i
7 2 0×4 8 0 31.47 5 9 . 9 4 SDTV, 480p
1 2 8 0×7 2 0 44.96 5 9 . 9 4 HDTV, 720p
1 2 8 0×7 2 0 45.00 6 0 . 0 0 HDTV, 720p
1 9 2 0×1 0 8 0 33.72 5 9 . 9 4 HDTV, 1080i
1 9 2 0×1 0 8 0 33.75 6 0 . 0 0 HDTV, 1080i
Aspect Ratio 16 : 9
Screen Size (H×V) 920.1×518.4mm
Resolution 852×480(Wide VGA)
Cell pitch (H×V) 0.36(H)×1.08(V)mm
Displayable Colors 16.77M(256×256×256)
Brightness 1000cd/㎡(w/o filter)
Contrast 3000:1
Viewing Angle over 160。
Input signal NTSC, SD, HD , VGA, SVGA, XGA
Tuner NTSC-M
PC Input Analog RGB (D-Sub 15pin), DVI-D
AC Input AC100-240V~, 60Hz, 4A
Power Consumption 320W