dBTechnologies ES 1203 - UPDATING THE FIRMWARE

57
ES-1203 Cod. 420120253 REV. 1.0
It is very important to keep the product rmware updated to ensure full functionality. Periodically check the
“DOWNLOADS” section of the http://www.dbtechnologies.com website.
1. Download and install the USB BURNER MANAGER onto your computer from the “SOFTWARE & CONTROLLER”
section.
2. Download the .zip le for your product from the “DOWNLOADS” section.
3. Connect the product to the PC using a USB cable (not supplied) with the correct connector type (see this detail
in the AMPLIFIER AND CONTROL SECTION FEATURES chapter).
4. Select “Open File” at the top right of the USB BURNER MANAGER screen.
5. Select the previously downloaded rmware le.
6. Follow the instructions shown on the screen.
7. Click “UPDATE”.
8. UPDATING THE FIRMWARE
English