34
LEAK TESTING
1. Open the gas cylinder valve.
Do not smoke while leak testing, and extinguish all open flames. Check with a full cylinder
and make sure all dials are OFF.
2. Apply soapy water to all
connections, hoses and fittings
from the cylinder to the
connection at the grill.
Soap bubbles will appear
where gas is escaping.
3. If leaking, turn gas off,
tighten leaking connections
and recheck.
If still leaking, turn gas off, and
call your local gas utility or the
dealer where you purchased
the grill.
To Next Page
Loading...
Need help?
General
