28
USING THE MULTI-TOOL
Use the multi-tool to lift and move grates, lift the charcoal burner lid, and adjust the
charcoal burner lid vent. You can also use it to scrape grease into the drip tray and to
scrape out the bottom of the charcoal insert after use.
Adjusting grates
Allow grates to cool, then insert
flat edge of multi-tool in middle
slot of grate, in front of center
divider. Rotate 90° so tool is
straight and other end fits in
slot. Lift or reposition the grate.
Adjusting charcoal insert lid
Insert the flat edge of the
multi-tool into the slot on
the lid of the charcoal insert,
and rotate 90° so the tool is
vertical.
Clearing grease
Use flat edge of multi-tool to
scrape grease into opening at
front of grill. Grease will collect
in drip tray.
To Next Page
Loading...
Need help?
General
