35
CHANGING THE GAS CYLINDER
2. If O-ring is in good condition,
connect the grill regulator to
the gas cylinder valve and turn
gas on. Check for leaks. See
'Leak testing.'
Inspect the gas connection hose every time you change the gas cylinder. Replace hose if
there are any signs of damage.
3. If there is no leak, place the
cylinder into the grill cabinet
with the pressure relief valve
facing away from you.
Always close the cylinder valve
after each use.
1. Before connecting new
cylinder, check the rubber
O-ring. If O-ring is damaged,
return it to gas supplier.
Do not use damaged cylinder.
No signs of damage Signs of damage
To Next Page
Loading...
Need help?
General
