dCS 954 User Manual Manual for Standard Software Version 1.5x
dCS Ltd June 2000
Manual part no: DOC136954 iss 2B1
Page 34
file 135954ma2b1.pdf available from website
Contact
dCS
on + 44 1799 531 999 email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0) web site: www.dcsltd.co.uk
Replaying 8 Channel P3D DSD
PUSH PUSH PUSH PUSH PUSH
Analogue
CH1(L) CH2(R) Sensitivity
CH1(L) CH2(R)
Digital I/O
Reference In Reference Out AES1 AES2 AES3 AES4 CH1 CH2
In Out
SDIF-2/DSD
75R
Clk
Remote
In
Out
MAINS FUSE 2A(T) ON OFF
Balanced
outputs
Unbalanced
outputs
- or -
To pre or power amplifier
dC S 954
Ch7 Ch8
PUSH PUSH PUSH PUSH PUSH
Analogue
CH1(L) CH2(R) Sensitivity
CH1(L) CH2(R)
Digital I/O
Reference In Reference Out AES1 AES2 AES3 AES4 CH1 CH2
In Out
SDIF-2/DSD
75R
Clk
Remote
In
Out
MAINS FUSE 2A(T) ON OFF
From 24 channel 44.1kS/s 16 bit recorder
Balanced
outputs
Unbalanced
outputs
- or -
To pre or power amplifier
dC S 954
Ch5 Ch6
PUSH PUSH PUSH PUSH PUSH
Analogue
CH1(L) CH2(R) Sensitivity
CH1(L) CH2(R)
Digital I/O
Reference In Reference Out AES1 AES2 AES3 AES4 CH1 CH2
In Out
SDIF-2/DSD
75R
Clk
Remote
In
Out
MAINS FUSE 2A(T) ON OFF
Balanced
outputs
Unbalanced
outputs
- or -
To pre or power amplifier
dC S 954
Ch3 Ch4
PUSH PUSH PUSH PUSH PUSH
Analogue
CH1(L) CH2(R) Sensitivity
CH1(L) CH2(R)
Digital I/O
Reference In Reference Out AES1 AES2 AES3 AES4 CH1 CH2
In Out
SDIF-2/DSD
75R
Clk
Remote
In
Out
MAINS FUSE 2A(T) ON OFF
Balanced
outputs
Unbalanced
outputs
- or -
To pre or power amplifier
dC S 954
Ch1 Ch2
AES 1 AES 2 AES 3 AES 4
AES/EBU Outputs
Wordclock Outputs
1 2 3 4 5 6
7 8 9 10 11 12
External
Sync
Remote
In
Loop
Out
Mains Fuse (2AT)
On Off
dC S 992
44.1kS/s Word Clock
Figure 13 – 8 channel P3D DSD setup
Four P3D capable units and a Master Clock can be used as above to convert 8
channels of P3D encoded DSD.
do this: Set all 4 DACs to dSd3 mode on the DSD menu page and press the
AES1 button to select the P3D input.
do this: Select a filter and ensure Mute is off.
To Next Page
Loading...
