DCS LINA - Page 9

NOTICE
Heavy or inflexible power cables may damage the power socket on the unit.
Some “audiophile” cables have unusual grounding or screening arrangements, or
they don't have the correct characteristic impedance. If you have difficulty using
such cables but the problem disappears when you use standard cables, contact
your cable manufacturer.
Digital inputs
Input Recommended cable and connector
AES / EBU 110Ω screened, twisted pair cables fitted with one male 3way XLR connector and one
female 3way XLR connector.
Word Clock
/ SPDIF
BNC
75Ω coax cables fitted with BNC connectors.
SPDIF RCA 75Ω coax cables fitted with RCA phono connectors.
Toslink Toslink fibre-optic cables.
Network RJ45 Ethernet cable.
USB Standard screened USB 2.0 cable fitted with one type ‘A’ connector and one type ‘B’
connector. The internal screen must be connected at both ends.
The Word Clock sockets require a simple DC-coupled connection. If you use
capacitor-coupled cables or cables with built-in networks, the interfaces may not
work correctly.
Analogue outputs
Output Recommended cable and connector
Balanced
output
Screened, twisted pair cables fitted with one male 3way XLR connector and one
female 3way XLR connector.
Unbalanced
outputs
Coax cables fitted with RCA phono connectors.
Getting started
LINA Network DAC User Guide
9