DCT Syrus - Configuration Script Summary

To Next Page

To Previous Page

rev1 – Dec 2013 www.digitalcomtech.com 18

Script

The example so far can be summarized with the following script:

#Syrus SB script

#Getting Started example

#Delete any previous configuration

>SRT;CONFIG<

>SXADP**U<

#Unit's ID

>SIDEXAMPLE<

#Use user set ID

>SXAID0<

#configuring the SIM's PIN

>SRFI1234<

#configuring the APN

>SRFAinternet.carrier-name.com<

#The remote AVL server address and port

>SXADP0000avl.server.com;2145<

#A Destination Address holding the server destination

>SDA4;P00<

#Time-only Time And Distance signal definition

>STD80300<

#Event triggered by T&D signal

>SED37NV4;TD8+<

#Input report event

>SED05NV4;IP3+<

#end

You can copy and paste this script to a new empty text file and have it save with a .tmf

extension and load it with Syrus Desk.