DCT Syrus - XANS - Network Status Query

rev1 – Dec 2013 www.digitalcomtech.com 47
XANS - Network Status
Qualifiers: Q, R.
Use this message to consult the state of the GPRS session and the state of the TCP
sockets of every IP-type Destination Point. The response message information is
presented in groups separated by a ";" character and each group separates its data
with a "," character.
A XANS messages interpreter is available, which will show the XANS information in
a easy to read format.
Some information may not be available all the time, in this case the field
corresponding to that data will be empty. It is possible to see more fields than those
explained here on the right side of each group of the message, however that
information can be ignored. The relevant information provided by this message is:
First group:
o Air Interface status.
 0= Air Interface is down.
 1= Air Interface is up.
o APN
o SIM PIN
o GPRS Login
o GPRS Password
Second Group:
o SIM insert state
 0= SIM not inserted
 1= SIM inserted
 2= SIM hardware off
o SIM state
 1= SIM ready
 2= SIM hardware off
 3= SIM inserted
 4= SIM removed
 5= PIN error
 6= waiting PIN
 7= SIM lock
 8= SIM error
o SIM lock reason. This field's value only matters if the SIM state is 7
 SIM PIN = waiting for SIM PIN.
 SIM PUK = waiting for SIM PUK if PIN was disabled after three failed attempts to enter
PIN.
o GSM register state
 0= Not registered
 1= Registered
 2= Not registered, searching.
 3= Rejected
 4= Error
 5= Registered, Roaming.