4.3 Changing the settings
4.3.1. Setting the set point temperatures
To set the various heating, DHW and swimming pool temperatures,
proceed as follows:
1. Press the
C
key.
2. To select the desired parameter, turn the rotary button.
3. To modify the parameter, press the rotary button.
To go back to the previous display, press the key
j
.
4. To modify the parameter, turn the rotary button.
5. To confirm, press the rotary button.
To cancel, press key
h
.
Menu C
Parameter Adjustment range Description Factory setting
DAY TEMP. A
5 to 30 °C Desired room temperature in comfort periods on circuit A 20 °C
NIGHT TEMP. A
5 to 30 °C Desired room temperature in reduced periods on circuit A 16 °C
DAY TEMP. B
(1)
5 to 30 °C Desired room temperature in comfort periods on circuit B 20 °C
NIGHT TEMP. B
(1)
5 to 30 °C Desired room temperature in reduced periods on circuit B 16 °C
DAY TEMP. C
(1)
5 to 30 °C Desired room temperature in comfort periods on circuit C 20 °C
NIGHT TEMP. C
(1)
5 to 30 °C Desired room temperature in reduced periods on circuit C 16 °C
WATER TEMP.
(1)
10 to 80 °C Desired domestic hot water temperature in the DHW circuit 55 °C
TEMP.TANK AUX
(1)
10 to 80 °C Desired domestic hot water temperature in the auxiliary circuit 55 °C
DHW A TEMP.
(1)
10 to 80 °C Desired domestic hot water temperature in circuit A 55 °C
SWIMMING P.T.B
(1)
5 to 39 °C Desired temperature for swimming pool B 20 °C
SWIMMING P.T.C
(1)
5 to 39 °C Desired temperature for swimming pool C 20 °C
(1) The parameter is only displayed for the options, circuits or sensors actually connected.
To Next Page
Loading...
