55xGenComm1_29
55
GenComm Page 24 - Identity Strings
1. Each string consists of 32 Unicode characters with the first character is at the lowest register
address, NULL terminators are not used.
2. The strings are user defined but are intended to allow the site and unit to be identified.
3. The contents of these strings will never change while the slave device is operating so a copy
can be held by the master to minimise traffic.
Registers
These are read only registers.
Register offset Name Bits
0 Identity string 1 512
32 Identity string 2 512
64 Identity string 3 512
96 Identity string 4 512
128 Identity string 5 512
160 Identity string 6 512
192 Identity string 7 512
224 Identity string 8 512
To Next Page
Loading...
Need help?
General
