Turning on the power of the
subwoofer
1
Press POWER ON/OFF switch on the rear panel of
subwoofer to turn on power to the subwoofer.
The subwoofer automatically connects wirelessly to the
sound bar, and the SYNC LED on the back of the subwoofer
lights up in green.
0
If the SYNC LED continues to blink in green and cannot connect to the
sound bar, try reconnecting manually. (v p. 57)
Adjusting the volume
1
Use VOL + or VOL – to adjust the volume.
The Visual Indicator LEDs indicate the volume. (v p. 13)
Adjusting the subwoofer volume
1
Use SUBWOOFER + or SUBWOOFER – to adjust the
subwoofer volume.
The Visual Indicator LEDs indicate the volume of the
subwoofer. (v p. 14)
Turning off the sound temporarily
(Muting)
1
Press .
The status LED blinks slowly in blue.
0
To cancel mute, either adjust the sound volume or press again.
Contents Connections Playback Settings Tips Appendix
29
To Next Page
Loading...
Need help?
General
