Power management
Power modes
o
Quick start mode
This unit automatically enters quick start mode to save power
in the following cases. During quick start mode, this unit
operations cause the power to turn on.
During quick start mode, the status LED lights in dim blue or
dim amber.
n
Ethernet
After around 20 minutes of no operation and no network
access after playing music via Ethernet.
n
Wi-Fi
After around 20 minutes of no operation and no network
access after playing music via Wi-Fi.
n
USB
After around 20 minutes of no operation and no network
access after playing music from a USB flash drive.
n
Bluetooth
After the Bluetooth connection is disconnected and there is
around 20 minutes of no operation and no network access
after playing music via Bluetooth.
n
AUX IN
After around 20 minutes of no audio.
n
OPT IN
After around 20 minutes of no operation after optical device
is put into standby.
n
HDMI IN
Play the HDMI device, such as a Blu-ray player, connected to
this unit. Around 20 minutes after HDMI device and TV are put
into standby.
n
HDMI OUT (eARC/ARC)
Connect this unit and the eARC/ARC compatible TV with HDMI
cable and play TV. Around 20 minutes after TV is put into
standby.
Contents
Connections Playback Settings Tips Appendix
68
To Next Page
Need help?
General
