Power does not turn on / Power is turned off
Power does not turn on.
0
Check whether the power plug is correctly inserted into the power outlet. (v p. 27)
0
If the power of this unit cannot be turned on with the remote control for the TV, press the c button to turn on the power of this unit.
(v p. 28)
0
Enable the TV’s HDMI control function when using an HDMI cable to connect this unit to your HDMI control-compatible TV. (See the
TV owner’s manual for details.)
Power automatically turns off.
0
If no operations have been performed for 20 minutes or more and audio is not being input, this unit automatically switches to quick
start mode.
Turn this unit’s power on again. (v p. 68)
Operations cannot be performed through the remote control unit
Operations cannot be performed through the remote control unit.
0
Battery is worn out. Replace with new battery. (v p. 10)
0
Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°. (v p. 10)
0
Remove any obstacle between this unit and the remote control unit.
0
Insert the battery in the proper direction, checking the f and e marks. (v p. 10)
0
This unit’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb light, etc.). Move this unit
to a place in which the remote control sensor will not be exposed to strong light.
Contents
Connections Playback Settings Tips Appendix
59
To Next Page
Loading...
Need help?
General
