Status Front LED action Rear LED action Description
Error
.
(solid)
.
(solid)
There was a setup error. Check your usage environment,
then follow the correct procedure to try setup again. If the
error occurs again, restore factory settings and try setup
again. (v p. 65)
.
(fast blink)
.
(off)
There is a hardware error. Unplug the power cord, wait a
little while, then plug the power cord back in.
Reset
.
(fast blink)
.
(solid)
Factory settings have been restored.
Contents Connections Playback Settings Tips Appendix
75
To Next Page
Loading...
