MAINTENANCE NOTICE
NM-275 index 09 Page 19/50 September 2021
7.2 Sorio
®
Double acting unit
7.2.1 On DP(A)X, DCX3/4 and NEOS actuators
• Connect the quick connector square 11a to the quick connector square 11b with a pneumatic tube 4/6.
• Connect the quick connector square 11 to the smooth square with a pneumatic tube 4/6.
• Wire the electric cables depending on the type of unit and following the connection diagrams provided in this
manual.
• Restore pressure on channel P using the right quick connector 7.