7.31 Filename extension
7.31.1 Filename extension
The filename extension for CGC 400 is .4cx
It will be possible to update the firmware using the DEIF utility software and use the normal procedure.
For more information, please refer to online documentation.
7.32 Modbus parameters
7.32.1 Modbus parameters
This is related to RS485 only.
The CGC 400 includes as native a Modbus port.
This port can be configured as ASCII or RTU. However, parameters differ depending on if it is set to ASCII or
RTU.
RTU mode ASCII mode
Speed 9600 bps Speed 9600 bps
8 data bits 7 data bits
Parity none Parity even
1 stop bit 1 stop bit
7.33 Battery low voltage alarm timer
7.33.1 Battery low voltage alarm timer
The CGC 400 handles a big capacitor to be able to handle battery drop down during the cranking phase.
CGC 400 DRH 4189340786 UK
Additional functions
DEIF A/S Page 91 of 96