7.5 Alarm inhibit
In order to select when the alarms are to be active, a configurable inhibit setting for each alarm has been
made. The inhibit functionality is a way to make an alarm inactive when the events, chosen in the menu be-
low, are active. The inhibit functionality is only available via the PC utility software. For each alarm, there is a
drop-down window where it is possible to select which signals have to be present in order to inhibit the alarm.
CGC 400 DRH 4189340786 UK Additional functions
DEIF A/S Page 51 of 96
To Next Page
Loading...
