MIB Installation Instructions and Reference Handbook
DEIF A/S
Page 31 of 50
Screen no. 12
Reset saved energy data:
Yes = reset energy data.
No = do not reset energy data.
and to change between yes and no
to accept changes and move to next screen
Example: Do not reset energy data
Screen no. 13
Reset of running hours:
Yes = reset running hours
No = do not reset running hours
and to change between yes and no
to accept changes and move to next screen
Example: Reset of running hours
Screen no. 14
New access code:
The access code can be changed here. It is
important to remember the new access code.
to move the cursor one digit at a time
to increase the digit
to decrease the digit
to accept changes and move to next screen
Example: 0001
To Next Page
Loading...
