V0608, 4.11
4.9. Data transfer
4.j
From this menu, all program data on the control can be stored on an external USB device or
restored from such a device.
Backup products Copy all products from the control to the USB disk.
Existing products on the USB disk with the same name
are replaced.
Restore products Copy all products present on the USB disk to the control.
Existing products on the control with the same name are
replaced.
Backup tools Copy all tools from the control to the USB disk. Existing
tools on the USB disk with the same name are replaced.
Beside the tools, also the program constants are stored.
Restore tools Copy all tools present on the USB disk to the control.
Existing tools on the control with the same name are
replaced.
To Next Page
Loading...
