V0608, 1.5
Keyswitch
The control has a keyswitch to prevent uncontrolled programming. With the keyswitch in the
off position only a selected program can be executed. The parameters cannot be changed to
wrong, unwanted values.
1.5. Software versions
The version of the software in your control is displayed at the upper side of the menu screen in
the programming mode.
Example of version number:
V 1.2
V stands for version
1 is version number
2 is version level
The version number is increased when new features are added to the software, the level
number is increased when minor corrections are needed in the existing version number.
Return to previous function or abort parameter edit.
To Next Page
Loading...
