Delem
V0504, 1
1. INTRODUCTION
The DAC-310 is a universal programmable controller, designed to
control machinery for incremental displacement of machine parts
such as the back gauge control of an industrial shear. For a better
understanding the back gauge will be referred to throughout this
manual but it is possible for any device with a movement,
measured by an incremental encoder.
The DAC-310 is not confined to axis positioning but can program
parameters, related to other machine functions, as well.
It is possible to program several steps which can be combined to
a program. The DAC-310 is capable of controlling servo-loop
systems, a one- or two-speed AC or DC drive system.
To Next Page
Loading...
