Table 2. DD9400 system with DS60 racking locations
Component Configuration Rack location
Controller location with DS60
s
helves
Single node or HA primary node U12-U13
HA standby node U15-U16
FS25 location with DS60 shelves HA U28-U29
DS60 locations Single node or HA U02-U11, U18-U27
Table 3. DD9400 system with ES40 racking locations
Component Configuration Rack location
Controller location with ES40
s
helves
Single node or high-availability (HA) primary node Rack 1: U13-U14
HA standby node Rack 1: U16-U17
FS25 location with ES40 shelves HA Rack 1: U40-U41
ES40 locations Single node or HA
● Rack 1 (11 shelves): U01-U12,
U19-U39
● Rack 2 (3 shelves): U01-U09
Identifying the rail kit components
The 2U sliding rail assemblies allow the server to be secured in the cabinet, and extended from the cabinet so that the system
cover can be removed to access the internal FRUs.
Figure 6. Sliding rail assembly - 2U systems
1
. Sliding rail (2)
2. Velcro strap (2)
3. Screw (4)
4. Washer (4)
The rails are compatible with racks with square holes, unthreaded round holes, and threaded round holes.
16 Install the System in the Rack
To Next Page
Loading...
