Need help?Do you have a question about the Dell EMC PowerVault MD3060e and is the answer not in the manual?
General| Product Type | Network Storage Server |
|---|---|
| Form Factor | Rack-mountable |
| Drive Bays | 60 |
| Supported Drive Types | SAS, NL-SAS, SSD |
| Drive Form Factor | 2.5-inch, 3.5-inch |
| Maximum Raw Capacity | Up to 720TB |
| Host Interface | 12Gb/s SAS |
| Number of Enclosure Management Modules | 2 |
| RAID Levels | 0, 1, 5, 6, 10, 50, 60 |
| Interface | 12Gb/s SAS |
| Host Connectivity | SAS |
| Number of Host Ports | 4 |
| Max Data Transfer Rate | 12Gb/s |
| Power Supply | Dual, hot-plug, redundant |
| Cooling | Redundant, hot-swappable fans |
| Compatibility | Dell |
Defines the two major components of Server Hardware Management software: SHM CLI and Server Hardware Monitor.
Explains the use of the Administrator's Guide for the SHM CLI with DSMS configurations and related documentation.
Lists related documentation for the Dell PowerVault MD3060e model, including installation and deployment guides.
Lists related documentation for the Dell PowerVault MD1200 series, including installation and getting started guides.
Lists related documentation for the Dell Storage MD1280 model, including installation and service guides.
Lists related documentation for the Dell Storage MD1400 series, including installation and administration guides.
Covers Windows installation, including Multipath I/O (MPIO) configuration and graphical/silent installation steps.
Covers Linux installation, including Device Mapper Multipath configuration and graphical/silent installation.
Explains the basic structure and syntax of SHM CLI commands, including executable name and arguments.
Details command syntax elements, input parameters like -a, -d, and their valid values.
Shows how to identify Host Bus Adapters (HBAs) using the 'shmcli list adapters' command.
Explains SHM CLI support for PERC/MegaRAID controllers and the necessary system library setup.
Describes how to identify enclosures and Enclosure Management Modules (EMMs) using SHM CLI commands.
Provides commands for updating drive firmware using the SHM CLI, specifying various identification methods.
Details commands to retrieve information about drives, filtering by adapter, enclosure, or drawer.
Organizes commands by functionality: Drive, List, and Informational commands for easy reference.
Details commands related to drive operations like blinking, power control, and drive status.
Lists commands for retrieving information about system components like adapters, enclosures, and drives.
Lists commands for displaying various system information such as adapter, drive, and enclosure details.
Explains how to update drive firmware using the SHM CLI with various parameters for specifying drives.
Details the process of updating EMM firmware using the SHM CLI, including required parameters.
Describes how to update adapter firmware using the SHM CLI, specifying the adapter and firmware file.
Explains how to view adapter status information, including PHY and expander details.
Describes how to view the global system topology of all objects in XML format.
Describes the Monitor service that verifies status and logs events, defaulting to local log file logging.
Details the location and content of local log files on Windows and Linux for event monitoring.
Explains how to view events and critical messages within the Windows Event Viewer.
Describes how to view warning and critical events logged in the Linux syslog.
Explains the Monitor logging configuration file, its location, and modification guidelines.
Provides directions for modifying logging functionality, such as changing log folder location or adding syslog.
Explains SNMP monitoring capabilities and how to configure trap destinations in the configuration file.
Lists critical or warning events logged by the monitor, including status changes and component events.
Explains how to control JBOD LED behavior for indicating drive failure or predicted failure.
Details how to configure the REST server, including enabling/disabling the service and setting IP/Port.
Explains how to access the REST service using base URLs, queries, and item group values.
Lists available REST API resources for device inventory, firmware updates, and device actions.
Outlines REST API resources for performing firmware updates using GET and POST verbs.
Lists REST API resources for performing device actions like blinking drives and validating firmware.
Describes REST API resources for retrieving information about specified firmware files.
Explains aliases used in REST API calls for object types like adapters, enclosures, and drives.
Details how to perform device inventory using REST API queries, similar to SHM CLI commands.
Provides steps for installing the Dell Storage PowerTools Server Hardware Manager SCOM management pack.
Outlines the capabilities of the SCOM management pack, including discovering and monitoring objects.
Describes the views that are automatically created in the Monitoring section of the SCOM application.
Explains the icons used to indicate severity levels of discovered Dell devices within the OpsMgr console.
Details methods to contact Dell for sales, technical assistance, and customer service issues online or offline.
To Next Page
