Dell EMC PowerVault MD3060e - Show Enclosure Information; Show Firmware File Information

Show enclosure information
Description
This command provides detailed information about the specied enclosure.
Command syntax
shmcli (info enclosure | infoenclosure | ie) (-a=<(SAS WWID | AdapterIndex)> -enc=<(WWN |
EnclIndex)> [-outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-
outputformat=<SupportedOutputFormats>] | [-h])
Parameters
Table 21. Enclosure information
Parameter Description
-a
Species the adapter used for the command. This is either SAS
WWID or AdapterIndex.
-enc
Species the enclosure used for the command. This is either WWN
or EnclIndex.
-h
Provides information about the command, description, and usage.
-outputformat
You can specify the following output formats: XML or JSON.
Command examples
• info enclosure -a = 1 -enc = 500a123456789012
• info enclosure -a = 1 -enc = 0
• info enclosure -enc = 500a123456789012 -outputformat = xml
Show rmware le information
Description
This command provides detailed information for the specied Firmware File such as its type and properties.
Command syntax
shmcli (info firmware | infofirmware | ifw) (-file=<FW.FilePath> [-
outputformat=<SupportedOutputFormats>] | [-h])
34
CLI reference