NIC indicator codes
The NIC on the back panel has an indicator that provides information about the network activity
and link status. The activity LED indicates whether the NIC is currently connected or not. The link
LED indicates the speed of the connected network.
Figure 7 NIC indicators
1. link indicator
2. activity indicator
The NIC indicators table describes different NIC indicator codes and condition of the connectivity.
Table 8
NIC indicators
Convention Status Condition
A Link and activity indicators are
off
The NIC is not connected to the
network.
B Link indicator is green The NIC is connected to a valid network
at its maximum port speed (1 Gbps or 10
Gbps).
C Link indicator is amber The NIC is connected to a valid network
at less than its maximum port speed.
D Activity indicator is flashing
green
Network data is being sent or received.
Power supply unit indicator codes
AC power supply units (PSUs) have an illuminated translucent handle that serves as an indicator
and DC PSUs have an LED that serves as an indicator. The indicator shows whether power is
present or a power fault has occurred.
Overview
Dell EMC VxRail Appliances on PowerEdge Servers E Series Owner's Manual 13
To Next Page
Loading...
