Dell EMC VxRail E series - Chapter 3 Initial Setup and Configuration

CHAPTER 3
Initial setup and configuration
For assistance on installation and deployment services, contact your EMC account team or your
reseller for installation services.
WARNING During the VxRail deployment process, an iDRAC account named vxadmin or
PTAdmin is created. This account provides hardware information to the VxRail Manager and
is required for the VxRail Manager and the cluster to function properly. Ensure that you do
not modify or delete this account.
Note: Do not install the appliance into a rack, or turn on the appliance during the deployment
process.
Dell EMC VxRail Appliances on PowerEdge Servers E Series Owner's Manual 31