Dell EMC VxRail E series - Left control panel view

Left control panel view
Figure 2 Left control panel view
The table below describes the left control panel features:
Table 2 Left control panel features
Item Indicator Icon Description
1 Status LED
indicators
N/A Indicate the status of the appliance. For more
information, see the Status LED indicators
section.
2 Appliance health
and appliance ID
indicator
Indicates the appliance health. For more
information, see the appliance health and
appliance ID indicator codes section.
Status LED indicators
Note:
The status LED indicators are always off and only turns on to a solid amber if any error
occurs.
Item 1 is the drive indicator, that flashes amber if an error occurs related to drive. Item 2 is the
electrical indicator that flashes amber if an electrical error occurs (for example, voltage out of
range, or a failed power supply unit or voltage regulator). Item 3 is the temperature indicator that
flashes amber if a thermal error occurs (for example, a temperature out of range or fan failure).
Item 4 is the memory indicator that flashes amber if a memory error occurs. Item 5 is the PCIe
indicator that flashes amber if an error occurs related to PCIe card.
Table 3
Status LED indicators and descriptions
Icon Description Condition Corrective action
Drive
indicator
The indicator turns
solid amber if there
is a drive error.
l
Check the System Event Log to
determine if the drive has an error.
l
Run the appropriate Online Diagnostics
test. Restart the appliance and run
embedded diagnostics (ePSA).
l
If the drives are configured in a RAID
array, restart the appliance, and enter
the host adapter configuration utility
program.
Temperature
indicator
The indicator turns
solid amber if the
Ensure that none of the following conditions
exist:
Overview
Dell EMC VxRail Appliances on PowerEdge Servers E Series Owner's Manual 7