Dell EMC VxRail E series - Chapter 1 Overview; Front view

CHAPTER 1
Overview
The VxRail
™
E Series appliance is a hyper-converged appliance that supports:
l
Up to two Intel Xeon Processor Scalable Family processors
l
10 x 2.5 inch hard drives or solid state drives (SSDs)
l
24 DIMM slots
l
Two AC or DC redundant power supply units
Note: The appliance supports only internal, hot swappable hard drives.
Note: In this document, HDD generically refers to both HDD and SSD.
l
Front view............................................................................................................................... 6
l
Back view of the appliance.....................................................................................................10
l
Drive indicator codes............................................................................................................. 12
l
NIC indicator codes................................................................................................................13
l
Power supply unit indicator codes..........................................................................................13
l
iDRAC Direct LED indicator codes......................................................................................... 16
l
Locating your appliance serial number....................................................................................17
l
VxRail documentation............................................................................................................ 19
Dell EMC VxRail Appliances on PowerEdge Servers E Series Owner's Manual
5