Dell EMC Z9264F-ON - Z9264 F-ON Switch Configurations; Luggage Tag

Z9264F-ON switch congurations
You can order the Z9264F-ON switch in several dierent congurations.
• Z9264F-ON AC or DC Normal Airow—sixty-four 1/10/25/40/50/100 GbE ports, two SFP+ 1/10 ports, two AC or DC power supply
and four fan subsystems with airow from the I/O side to the power supply side
• Z9264F-ON AC or DC Reverse Airow—sixty-four 1/10/25/40/50/100 GbE ports, two SFP+ 1/10 ports, two AC or DC power supply
and four fan subsystems with airow from the power supply side to the I/O side
• Fan with airow from the I/O side to the PSU side—normal airow
• Fan with airow from the PSU side to the I/O side—reverse airow
• AC or DC power supply with airow from the I/O side to the PSU side—normal airow
• AC or DC power supply with airow from the PSU side to the I/O side—reverse airow
Luggage tag
The switch has a pull-out tag, known as a luggage tag, on the I/O-side of the switch. The front of the luggage tag includes switch ID
information. The back of the luggage tag includes a QRL that takes you to a How-To site where you can watch videos about racking the
switch, replacing components, conguring port channels, and so on.
Figure 5. Z9264F-ON luggage tag
1
SVC Tag 2 MAC Address
3 PPID 4 Express Service Code
12 Z9264F-ON switch