Dell EMC Z9264F-ON - Specifications; Chassis physical design

Specications
This section lists the Z9264F-ON switch specications.
CAUTION: Operate the product at an ambient temperature not higher than 45°C (113°F).
CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly replaced. Replace only with same
or equivalent type of battery. Dispose of the batteries according to the manufacturer's instructions.
NOTE: For RoHS information, see Restricted Material Compliance.
Topics:
• Chassis physical design
• IEEE standards
• Agency compliance
• USA Federal Communications Commission FCC statement
• European Union EMC directive conformance statement
• Japan VCCI compliance for class A equipment
• Korean certication of compliance
• China warning
• Safety standards and compliance agency certications
• Electromagnetic compatibility
• Product recycling and disposal
Chassis physical design
Table 5. Chassis physical design
Parameter Specications
Height 3.37 inches (85.6 mm)
Width 17.4 inches (442 mm)
Depth
Chassis: 20.0 inches (510 mm)
PSU/fan tray handle: 1.38 inches (35 mm)
Chassis weight with factory-installed components
34.6 lbs (2 PSUs and 4 fans)
15.7 kg (2 PSUs and 4 fans)
Rack clearance required
Front: 5 inches (12.7 cm)
Back: 5 inches (12.7 cm)
9
38 Specications