Storing components
If you do not install your Z9264F-ON switch and components immediately, properly store the switch and all optional components using
these guidelines:
• Storage location temperature must remain constant. The storage range is from -40°C to 70°C (-40° to 158°F).
• Store on a dry surface or oor, away from direct sunlight, heat, and air conditioning ducts.
• Store in a dust-free environment.
NOTE: ESD damage can occur when components are mishandled. Always wear an ESD-preventive wrist or heel ground strap
when handling the Z9264F-ON switch and accessories. After you remove the original packaging, place the Z9264F-ON switch
and components on an anti-static surface.
Site preparations 15
To Next Page
Loading...
