Table 9. Storage (continued)
Options Description
● Secure Digital (SD) Card Read-Only Mode (Disabled by
default).
Display
This section provides display details and settings.
Table 10. Display
Options Description
Display Brightness
Brightness on battery power
This section has a scroll bar which allows the user to set the
brightness level on battery power (lowest setting by default).
Brightness on AC power
This section has a scroll bar which allows the user to set the
brightness level when system is connected to the AC adapter
(highest setting by default).
EcoPower
This section contains a toggle switch which allows the
user to enable/disable EcoPower feature that can increase
the battery life by reducing the display brightness when
appropriate.
Full Screen Logo
Full Screen Logo
This section contains a toggle switch which allows the user to
enable/disable the option to view a full screen logo (disabled
by default).
Connection
This section provides connection details and settings.
Table 11. Connection
Options Description
Integrated NIC
This section contains options to enable/disable the UEFI
networking protocols, allowing pre-OS and early OS
networking features to use any enabled NICs.
The options are as follows:
● Disabled
● Enabled
● Enabled with PXE(Selected by default)
Wireless Device Enable
This section contains a toggle switch that allows the user to
enable or disable WLAN and Bluetooth on the computer. The
options are as follows:
● WLAN (Enabled by default).
● Bluetooth (Enabled by default).
Enable UEFI Network Stack
This section contains a toggle switch that allows the user to
enable or disable installation of UEFI networking protocols.
(ON by default)
92 System setup
To Next Page
Loading...
