Dell Alienware Area-51m - Removing the Coin-Cell Battery

Removing the coin-cell battery
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer. After working inside your computer, follow the instructions
in
After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION: Removing the coin-cell battery resets the BIOS setup program’s settings to default. It is recommended
that you note the BIOS setup program’s settings before removing the coin-cell battery.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the solid-state drive (in SSD2 slot).
Procedure
1 Disconnect the coin-cell battery cable from the system board.
2 Using a plastic scribe, pry o the coin-cell battery from the system board.
46