Dell Alienware Area-51m - Replacing the Palm-Rest Assembly

Replacing the palm-rest assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer. After working inside your computer, follow the instructions
in
After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
Place the palm-rest assembly on a clean and at surface.
Post-requisites
1 Replace the macro keys.
2 Replace the keyboard.
3 Replace the left power-adapter port.
4 Replace the system board.
5 Replace the right power-adapter port.
6 Replace the heat-sink assembly.
7 Replace the computer base.
8 Replace the display assembly.
9 Replace the rear I/O cover
10 Replace the touchpad.
98