Dell Alienware Area-51m - Removing the Right Power-Adapter Port

Removing the right power-adapter port
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer. After working inside your computer, follow the instructions
in
After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the memory modules.
4 Remove the wireless card.
5 Remove the solid-state drive.
6 Remove the rear-I/O cover.
7 Remove the computer base.
8 Remove the right power-adapter port.
9 Remove the graphics card.
10 Remove the processor.
11 Remove the system board.
Procedure
Disconnect the left power-adapter port cable from the system board.
83