What to do if Dell B5460dn Mono Laser Printer shows 'Tray [x] paper size unsupported'?
If your Dell printer displays 'Tray [x] paper size unsupported', the paper size in the specified tray is not supported. Replace it with a supported paper size.
Why does my Dell printer say 'Unsupported disk'?
If your Dell printer displays 'Unsupported disk', it means an unsupported disk has been inserted. Remove the unsupported disk and install a supported one.
How to resolve 'Unsupported option in slot' error on Dell Printer?
If your Dell printer displays 'Unsupported option in slot', turn off the printer, unplug the power cord, remove the unsupported option card, replace it with a supported card, connect the power cord, and then turn the printer back on.
What does 'Disk near full' mean on my Dell B5460dn Mono Laser?
If your Dell printer displays 'Disk near full. Securely clearing disk space', press on the printer control panel to clear the message. You can also delete fonts, macros, and other data stored in the printer hard disk, or install a printer hard disk with higher capacity.
How to fix 'Memory full' error on Dell printer?
If your Dell printer displays 'Memory full', you can press on the printer control panel to clear the message. You can also try decreasing the resolution setting or installing additional printer memory.
Why does my Dell B5460dn Mono Laser say 'Incorrect paper size'?
If your Dell printer is displaying 'Incorrect paper size', load the correct size of paper in the tray. Also, check the tray length and width guides to ensure the paper is loaded properly. Make sure the correct paper size and type are specified in Print Properties, the Print dialog, and the Paper menu on the printer control panel. If the MP Feeder Size is set to Universal, ensure the paper is large enough for the data being printed. Alternatively, you can press on the printer control panel to clear the message and print using a different tray, or cancel the print job.
What to do if Dell B5460dn Mono Laser Printer shows 'Check tray [x] connection'?
If your Dell printer displays 'Check tray [x] connection', try turning the printer off and then back on. If the error occurs again: 1. Turn off the printer. 2. Unplug the power cord. 3. Remove the specified tray. 4. Reattach the tray. 5. Connect the power cord. 6. Turn the printer back on. If the error persists, repeat steps 1-3, then contact technical support. You can also press to clear the message and continue printing.
How to resolve 'Load [paper source] with [custom string]' on Dell B5460dn Mono Laser Printer?
If your Dell printer shows 'Load [paper source] with [custom string]', load the indicated tray or feeder with the correct size and type of paper. Alternatively, you can press on the printer control panel to clear the message and continue printing, or cancel the current job.
How to fix 'Too many trays attached' error on Dell B5460dn Mono Laser Printer?
If your Dell printer displays 'Too many trays attached', turn off the printer, unplug the power cord, remove the extra trays, connect the power cord, and then turn the printer back on.
What does 'Cartridge low' mean on my Dell B5460dn Mono Laser?
If your Dell printer indicates 'Cartridge low', you may need to order a toner cartridge. You can press to clear the message and continue printing.
General safety precautions and warnings for printer operation and handling.
Guidelines for choosing an optimal and safe placement for the printer.
Steps for installing optional hardware like memory cards and hard disks.
Instructions for installing various hardware upgrades and accessories.
Procedures for installing printer drivers and software on Windows and Macintosh.
Steps for wireless network setup using WPS or Embedded Web Server.
Configuring the printer for different paper sizes, types, and custom settings.
Instructions for properly loading paper into the 550-sheet tray.
Step-by-step guide for loading paper into the 2100-sheet tray.
Procedures for replacing consumables like toner cartridges and imaging units.
Troubleshooting steps for issues related to paper jams and misfeeds.
Solutions for common print quality issues like jagged text and clipped images.
General| Print Technology | Laser |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Standard Memory | 512 MB |
| Output Capacity | 500 sheets |
| Processor Speed | 800 MHz |
| Weight | 52.9 lbs |
| Monthly Duty Cycle | 275, 000 pages |
| Input Capacity | 650 sheets |
| Connectivity | USB 2.0, Ethernet |
| First Page Out Time | 4.4 seconds |
| Maximum Paper Size | A4, Legal |
| Operating System Compatibility | Windows, Linux, Mac OS |
| Duplex Printing | Standard |
To Next Page
