Installing the system board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the connectors on your system board.
1. WLAN card connector
2. G-sensor cable connector
3. World-facing camera cable connector
4. Display cable connector
5. Speaker cable connector
6. Battery cable connector
7. Keyboard cable connector
8. Touchpad cable connector
The following images indicate the location of the system board and provide a visual representation of the installation procedure.
NOTE:
If the CPU thermal pad on the palm-rest (underneath the system board) gets detached, adhere it back onto the
palm-rest.
Removing and installing components 31
To Next Page
Loading...
