Steps
1. Align and place the camera module into the slot on the display assembly.
2. Gently press the camera module until it clicks into place.
3. Connect the camera cable to the connector on the camera module.
Next steps
1. Install the display panel.
2. Install the display assembly.
3. Install the base cover.
4. Follow the procedure in After working inside your computer.
Display hinges
Removing the display hinges
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the display assembly.
4. Remove the display panel.
About this task
The following image indicates the location of the display hinges and provides a visual representation of the removal procedure.
Removing and installing components
47
To Next Page
Loading...
