About your monitor | 15
Electrical specifications
Model D7523QT
Video input signals • HDMI 2.0, 600 mV for each dierential line, 100
ohm input impedance per dierential pair
• DisplayPort 1.2, 600 mV for each dierential line,
100 ohm input impedance per dierential pair
AC input voltage/
frequency/current
100 VAC to 240 VAC/50 Hz or 60 Hz ± 3 Hz/3.5 A
(typical)
Inrush current 120 V: 30 A (maximum) at 0 °C (cold start)
240 V: 60 A (maximum) at 0 °C (cold start)
Power Consumption 0 W (O mode)
1
0.3 W (Standby Mode)
1
147.5 W (On Mode)
1
245 W (Maximum)
2
166.5 W (Pon)
3
512.2 kWh (TEC)
3
1
As defined in EU 2019/2021 and EU 2019/2013(AC Power Off).
2
Maximum brightness and contrast setting.
3
Pon: Power consumption of On Mode measured with reference to Energy Star
test method.
TEC: Total energy consumption in kWh measured with reference to Energy Star
test method.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components, and
devices you ordered and shall have no obligation to update such information.
The customer should not rely upon this information in making decisions about
electrical tolerances or otherwise. No warranty as to accuracy or completeness is
expressed or implied.
To Next Page
Loading...
