52 | Troubleshooting
Product-specific problems
Specific symptoms Possible solutions
Screen image is too
small
·
Reset the monitor to factory settings (Factory Reset).
Cannot adjust the
monitor with the
buttons on the back of
the panel
·
Turn off the monitor, unplug the power cord, plug it back, and
then turn On the monitor.
No input signal when
user controls are
pressed
·
Check the signal source. Ensure the computer is not in standby
or sleep mode by moving the mouse or pressing any key on the
keyboard.
·
Check if the video cable is plugged in properly. Disconnect and
reconnect the video cable if necessary.
·
Reset the computer or video player.
The picture does not fill
the entire screen
·
Due to different video formats (aspect ratio) of DVDs, the
monitor may display in full screen.
To Next Page
Loading...
