1. Follow the procedures in Before You Begin.
2. Remove the computer cover (see Removing the Computer Cover).
3. If your computer includes a card retention mechanism to secure the x16 card, press the release tab downward gently
and then pivot the mechanism upward to access the card slots.
1 release tab 2 card retention mechanism 3 card retention door
4. Push the two release tabs on the card retention door from the inside to pivot the door open; the hinged door will remain
in the open position.
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (12 of 68) [12/9/2007 11:22:24 PM]
To Next Page
Loading...
